Submersible pumps E-Tech 4 “
Applications:
• Municipal water networks, fountains and waste water
• Water distribution and pressure increase
• Sprinkler and irrigation systems, water purification systems
• Industrial cooling and processing
• Extractive industry, drainage and drainage
• Fire prevention systems
• Water supply to / from tanks, basins and wells
• Lifting and distribution of a wide range of liquids
• Loading and unloading of tanks and autoclaves
• Landscape interventions and construction of lawns
• Greenhouses and nurseries
• Wells and drains for residential and agricultural uses
• Food industry
• Industrial applications in general
Features:
• Compact product, reliable and suitable for installation even horizontally
• Built-in check valve to protect the pump from the risk of water hammer
• Floating impellers to ensure better performance and longer pump life against abrasion
• The hydraulic design is such as to ensure overall efficiency, thus reducing energy consumption and making pumping systems more effective
Features:
• Capacity up to 24 m3 / h at 50Hz
• Pumpable liquid: chemically and mechanically non aggressive
• Water temperature range: from 0 ° C to 40 ° C
• Maximum allowable amount of sand 25 g / m3, maximum solids size 2 mm
• Maximum diameter of the pump (with cable cover): 95 mm
• Delivery: 1 ¼ “VS1-2-4-6, 2” VS8-10-15
• Rotation: anticlockwise looking at the delivery
• Motor mount compliant with NEMA standard
• The pump can run continuously in vertical or horizontal position
6 “E-Tech Submersible Pumps
Features:
• Impellers and stage bodies made of stainless steel to resist corrosion
• Heavy duty stainless steel structure, with external jacket, to ensure the permanent alignment of all components in order to increase the uptime and ensure trouble-free operation
• Floating shim ring in PTFE, ceramic guide bush (tungsten carbide on request) and grooved bearing in nitrile rubber to ensure wear resistance and, therefore, constant performance over time and product reliability
• Compact, reliable product suitable for horizontal installation
• Built-in check valve to protect the pump from the risk of water hammer
• The radial models with double reinforcement ring in the sleeve and the mixed flow models longer than 3 meters are equipped with an upper guide bushing in tungsten carbide (Widia) and intermediate guide bushing in tungsten carbide (Widia) in addition to a special intermediate nut with elastic cone
• The hydraulic design is such as to ensure overall efficiency, thus reducing energy consumption and making pumping systems more cost-effective
Applications:
• Water distribution and pressure increase
• Irrigation systems, water purification, filtration and reverse osmosis systems
• Industrial and process cooling
• Mining industry
• Fountains
• Industrial applications in general
Specifications:
• Flow rate up to 80 m3 / h at 50 Hz
• 70 Bar (700 m) at 50 Hz
• Maximum allowable amount of sand 100 g / m3
• Water temperature range: from -5 ° C to 60 ° C
• Rotation: anticlockwise looking at the discharge port
• Motor mount compliant with NEMA standard
• The pump can run continuously in vertical or horizontal position
• Motors: see the section dedicated to submersible motors
E-Tech Submersible Pumps 8 “